MiniMill 101 ID Mount Machine
Part number: MiniMill 101
MiniMill 101 Specifications
- Free Speed (Rpm): 100
- Locking Range (in.): .984 - 3.031
- Locking Range (mm): 25 - 77
- Power (Hp): 1.3
- Torque (Nm): 140
- Torque (Ft. Lbs): 105
- Feed Stroke (in.): .787
- Feed Stroke (mm): 20
- Application Range (in.): .984 - 3.504
- Application Range (mm): 25 - 89
- Total Working Application Range (in.): 10 - 102
- Total Working Application Range (mm): 10 - 107
- Total Working Locking Range (in.): .394 - 4.016
- Total Working Locking Range (mm): .394 - 4.213
The MiniMill 101 is a rugged, fast, portable weld end preparation lathe designed for various tubes and pipes, including stainless steel and other high chromium materials. Our standard machine can be used for pipe sizees of 20 - 74 mm ID (0.787" - 2.913") and comes with a 88 mm cutting head.
Standard Set Up
- Shaft25 - Self-align, heavy duty locking system. Shafts and jaws are longer and wider to ensure maximum clamping force.
- 88 MM (3.46") - The popular, medium cutter head, designed to fasten the wide range of cutting inserts.
Optional Heads
- 60 MM (2.36") - The smallest cutter head, designed to fasten the wide range of cutting inserts.
- 106 MM (4.56") - The popular, large cutter head, designed to fasten the wide range of cutting inserts.
- OBMH - Head for bevelling tubes without membranes in the boiler water walls.
- SWROTC - Seal weld removal head over tube circumference prior to re-welding the damaged joint thout removing the tube.
- STWRMH - Head dedicated f strength weld removal. Heads are easy to align and sized per tube diameter.
- TFMH - Tube facing milling head for tubes made of any type of material. Utilizes 6% cobalt inserts.
Optional Shafts
- A system with interchangeble guide shafts. A complete set covers 10.0 to 15.0 mm ID tubes.
- A system with interchangeable guide shafts. A complete set cover 12.4 to 48.0 mm ID tubes.
Other Optional Accessories
- Ratchet Feed - Feed system allowing to work in narrow and tight locations, eg. in water walls.
- Fast Clamping System - System offers rapid tube to tube cycle time, increased productivity (up to 4x) with little operator fatique. Ideal for large amount of end preps.
- Speed Reducer - Easy to use gearbox for 3x speed reductioin. Increases the torque, enabling the machine to generate a thic chip whilst reducing the cuttting time.
